Mongler98
Top Post Dawg
- Joined
- Mar 23, 2011
- Location
- COLORADO (SE of Denver)
- TDI
- 98 Jetta TDI AHU 1.9L (944 TDI swap in progress) I moved so now i got nothing but an AHU in a garage on a pallet.
That seems a bit high, by about 100x!
Still $106 USDThat seems a bit high, by about 100x!
I bought my set in 2013 and it was then about $85 from Amazon. Goes up like everything else.Still $106 USD
The mount or the mount bracket? Either way both should be the same.Would a mount from a 2004 2.0 Automatic fit an 2000 ALH passenger side?
Good information, thanks!From the Time-Sert website: "On installation the bottom internal threads of the insert are cold rolled to expand the mating external threads into the base material locking the insert in place. Locking mechanism is at the bottom of insert."
If you use the longer Time-Sert in the mount, you will likely need to use longer bolts. The inserts need to have the bolt thread through by a couple of full threads. Don't forget to consider that the mounting bolts in this application are tapered when you're measuring for longer bolts.
If you installed these with them out of the car so you could clean all of the oil out of the hole and used lots of red Loctite, it might hold up.