Windshield washer

I think the hose to the driver's side windshield washer nozzle blew out. There is no spray on the windshield, and there is a lot of fluid dripping from that corner of the hood onto the ground. How do I replace this hose? And what hose should I get?

I'll watch this thread since I lost my RW washer. It now drips into the interior.

I have had this issue. On mine the hose was popping off of the elbow. I finally removed the elbow and connected the tubing to the nozzle, I also used a zip tie to ensure that it will not come off. This has worked for about 6 months.

Also, you may want to put some rain-x on the windshield. It works great for regular rain and mist.

What size is the hose?

I am talking about the stock tube that is already in the hood. I just pulled it out a little more and connected it to the nozzle.