Rodrigues
Veteran Member
My clutch pedal has been feeling like there has been some air in the lines and while bleeding them I can't get the clutch master cylinder to draw any fluid from the reservoir. I unhooked the line from the slave cylinder and put it directly to a mityvac and it holds vacuum (as opposed to displacing the vacuum with brake fluid from the reservoir). I tried moving the pedal up and down (I have to manually pull up the pedal) and that doesn't do anything. Is there a reason why a master cylinder won't draw fluid from the reservoir? I tried reverse bleeding by pushing fluid from the slave cylinder into the master and it just pressurizes and doesn't actually flow any fluid into the master. It seems like no fluid will go in/out of the master cylinder and it's completely blocked.