JFettig
Vendor
looks a little top heavy...
What does the HE200 spool at with the 5cm and what about the 4cm? Looks pretty laggy in your video.hey - the car has been running the He200 at 34psi daily for a few years now - still running strong out on the West Coast...
do you have any questions about the turbos? Since the build we were able to locate a 4cm version of the He200 so the spool is even better now...that turbo pulled hard and was a lot of fun...
check here - there are a few videos of the car and pm if you need help sourcing a turbo for your project or check out www.eurotrashmotorsports.com
https://youtu.be/h410ITkNwLw
Looks like others with a HE200 hit full boost around 2500rpm which is perfect. Right now mine hits full boost just under 2000rpm and it is kinda hard to drive in the rain.didn't really give up on it - it ran very well on the single 200 and I sold it before I added the second...the compound setup will definitely help with the spool but honestly I drove it daily and absolutely loved it...if I remember correctly the videos are with a 5.5cm He221 so it's already bigger than the 200...on another engine we noticed a drop of about 500rpm with the 4cm housing
I think the 4cm He200 and 12cm He351 would be a great combo as long as you have good fuel to support it...
do you have a build thread? this will be a fun car