Steve Addy
Top Post Dawg
That would be great Mark but don't go to a lot of effort. I'm sure at some point I will stumble upon a tensioner pulley with a 17mm insert.The center will just press out.
I’ve had one fail on me at around 80k and seen 2 others fail under 100k. It was new but had the smaller bearings and not the larger one. If they’re all that’s available I recommend changing them with the timing belt. I have changed the ones with the 17mm center due to them feeling dry but have never had one actually fail.
Steve, I may have a spare I can drop in the mail. I’ll have to check my stash.
Todd, that's one manufacturer I don't trust at all for just about everything they sell. I think I have a flange somewhere by URO and I'm not excited about using it.Hmmmmm..... I’m curious what the 17mm one will log. Makes me want to look at one and see if it can be relubed.
At around $5 each, for the Uro, you’ll log 200k before you reach the cost of the Mustang part.
-Todd
Steve