Boost logs look ok here?

firehawk618

Veteran Member
Joined
Aug 20, 2003
Location
Marysville, WA
TDI
2011 Golf TDI, 2dr, M6, Stock
I am running a tune that I purchased from a tuner in the UK. It pulled pretty hard right after I first installed it. My clutch was even starting to slip in 5th gear. Now my clutch doesn't slip anymore and it feels like the power just isn't as strong.

I have no engine codes, all vacuum hoses test good, VNT actuator starts moving at about 4 and stops at around 19 with my vacuum pump.

Do these logs look ok?

Thanks in advance! :D

 

asap03

Veteran Member
Joined
Mar 21, 2008
Location
Romania/Europe
TDI
G5 1.9TDI PD 2007 BXE
I don't know what is your engine code. What I can say is that your absolute specified boost is 2 bar.
On my european BXE engine - 77 kilowatts (105 PS; 103 bhp) @ 4,000 rpm; 250 newton metres (184 lbf·ft) @ 1,900 rpm I had 2,04 bar specified boost when I did a VCDS log at WOT.
So I assume your power now is very close to my stock power if we take into consideration only the boost mapping.
 
Top