www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You




Go Back   TDIClub Forums > TDI Model Specific Discussions Areas > VW MKV-A5 Golf/Jettas

VW MKV-A5 Golf/Jettas Discussions area for A5/MkV Jetta/Golf (2005/2006 PD and 2009 CR).

Reply
 
Thread Tools
Old January 6th, 2018, 00:49   #1
D5252T
Newbie
 
Join Date: Jan 2018
Location: Finland
TDI(s): Touran
Default Eletromechanical power steering breaks after replacement

I have red steering wheel logo at instruments. I have changed to power steering unit twice ( first second hand , secondd time "refurbished"). Both times unit works for couple of days. Then it starts to show red steering wheel when started hot - it works in the morning after night rest. Eventually it does even work at morning. I have also changed to wiring harness, battery, checked grounds. I have also tried to connect it when it is not attached to car. No help. Unit takes 150 mA of current so there is something going on inside unit.
Car is 2003 Touran (same as Golf mk5 and power steering is generation 1). Generation 1 is not made anymore and car is is not compatible with gen2.
Is there same kind of security feature at the power steering like in some air bags that if it finds out that there is some kind error in the components of power steering it goes to safe mode when it is not possible to connect with Rosstech? I gues in the airbags there have been such safe modes.
First it gives this kind of error:
Code:
Address 19: CAN Gateway        Labels: 1K0-907-530-V1.clb
Part No SW: 1K0 907 530 A    HW: 1K0 907 951 
Component: Gateway         H06 0020  
Revision: 06          Serial number: 000001332847E4
Coding: 3D0F0340078002
Shop #: WSC 01324 785 00200
VCID: 2558E14F75E1F32A4C164F9-8071
1 Fault Found:
01309 - Power Steering Control Module (J500) 
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 6
Reset counter: 108
Mileage: 245950 kmAddress 17: Instruments        Labels: 1K0-920-xxx-17.lbl
Part No: 1T0 920 850 BX
Component: KOMBIINSTRUMENT VDD 2014  
Coding: 0006101
Shop #: WSC 45173 205 61667
VCID: 07048BC7EF2DC13A5E2A851-8053
1 Fault Found:
01309 - Power Steering Control Module (J500) 
004 - No Signal/Communication - Intermittent
Time Indication: 0
Date: 2000.00.00
Time: 14:37:59
At the end this is what i get:
Address 19: CAN Gateway        Labels: 1K0-907-530-V1.clb
Part No SW: 1K0 907 530 A    HW: 1K0 907 951 
Component: Gateway         H06 0020  
Revision: 06          Serial number: 000001332847E4
Coding: 3D0F0340078002
Shop #: WSC 01324 785 00200
VCID: 2559E66775E1F32A4C164F9-8070
1 Fault Found:
01309 - Power Steering Control Module (J500) 
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 245191 km
Time Indication: 0
Date: 2000.00.00
Time: 00:14:05

Last edited by D5252T; January 6th, 2018 at 00:51.
D5252T is offline   Reply With Quote
Old January 13th, 2018, 20:18   #2
Bob S.
Veteran Member
 
Join Date: Aug 2006
Location: Central MD.
Default

Try cleaning the grounds connections. All the grounds, especially the one that the steering module is connected to. But, clean them all.
__________________
A B4V, a CRUA & a couple BRMs & ALHs in the family.
Bob S. is offline   Reply With Quote
Old January 14th, 2018, 09:51   #3
Peytron
Veteran Member
 
Join Date: Sep 2008
Location: Barrie, Ontario
TDI(s): '10 Jetta
Default

I had the same problem around the same mileage (226k for me). Intermittent at first like you, then later completely failed. Turned out to be a frayed wire.
__________________
Peytron is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Eletromechanical power steering breaks after replacement D5252T VW MKV-A5 Golf/Jettas 0 January 6th, 2018 00:48
Power Steering Rack replacement keith102 VW Passat Family (NMS and B7) TDIs (2012+) 5 November 1st, 2016 13:34
Replacement Power Steering Pump phillke VW MKIII-A3/B4 TDIs 4 September 16th, 2015 10:58
power steering pump replacement garryp4 VW MKIV-A4 TDIs (VE and PD) 3 June 26th, 2010 07:27
Suspension, steering and breaks. (all in one shot) Golf_GTDI Upgrades (non TDI Engine related) 16 June 16th, 2005 10:07


All times are GMT -7. The time now is 17:33.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.12511 seconds with 12 queries
[Output: 59.67 Kb. compressed to 54.19 Kb. by saving 5.48 Kb. (9.18%)]