Running wires for In tank pump?

T

TwistedSmoke

Veteran Member
Joined
Nov 19, 2016
Location
Milford ,Pa
TDI
03 Jetta tdi
2003 alh jetta
Ok i ordered an in tank pump and wire harness from Idparts.com. I got the relay all setup and connected. But now the instructions is telling me to run the wire cross to the passenger side of the car next to the cabin air filter to a grommet. But on my car there is no grommet there. should i run it threw the driver side where i did see a grommet ?:confused:
 
C

Curious Chris

Top Post Dawg
Joined
Jun 11, 2001
Location
Pineview GA
TDI
Jetta Wagon 2003 RIP Rockford IL
TwistedSmoke said:
2003 alh jetta
Ok i ordered an in tank pump and wire harness from Idparts.com. I got the relay all setup and connected. But now the instructions is telling me to run the wire cross to the passenger side of the car next to the cabin air filter to a grommet. But on my car there is no grommet there. should i run it threw the driver side where i did see a grommet ?:confused:
Click to expand...
Yes on the driver side there is a grommet that you can access. I ran power from the X75 relay when I had the intake pump.
 
You must log in or register to reply here.
Top