TurboModified
Member
So at 250,000 miles I just had to replace the factory CV axle passenger side (the longer one). Since I'm in Mexico I don't have tons of choices and had to go with an Autozone axle Ever since the replacement I get a light vibration right at 1800 and 3800 rpm. Doesn't matter the speed or gear I'm in, just at that rpm. Doesn't happen tho if I'm just sitting in neutral and revving the engine. Best way I can describe it like if the engine was bolted directly to the frame and you can feel the harmonics of the engine. But it smoothes out above & below that rpm. The new axle is a solid bar type, not the larger hollow OE style, so maybe it doesn't dampen harmonics as good as the OE axle?
It's annoying but I've gone over 2,000 miles now like this and its still the same, but doesn't seem to affect anything else and hasn't gotten worse or better.
Nothing else was replaced or changed so could it just be this axle causing the vibration?
It's annoying but I've gone over 2,000 miles now like this and its still the same, but doesn't seem to affect anything else and hasn't gotten worse or better.
Nothing else was replaced or changed so could it just be this axle causing the vibration?