reduce body roll?

I have a 2k1 golf with h&R cup kit and I took the front swaybar off for clearance and handling reasons. I like the fact that I don't have understeer anymore, but I don't like the body roll much. Is there anyway to fix this without having understeer again? What have you guys done? autocrossers?

You need to put the front antiroll bar back in place and install an additional REAR antiroll bar.

live with it

autotech http://www.autotech.com/vortex/ (?) makes a lightweight front bar that supposedly is desinged around the clearance problem

definately add a rear bar . . . other than that - take a seasickness pill and hope the body doesn't roll off . . . .

you can try a rear sway bar.

Neuspeed sells one that is adjustable and uses existing holes in undercarriage to install.

Autotech sells one that you need to drill holes to install and is not adjustable. Currently a group buy on these on the Vortex.

Shine sells one that you need to drill holes to install and is not adjustable. This bar however is hidden if you are worried about ground clearance.

Thanks, I'll try a rear bar first. If that turns out to be too much over steer, I'll throw in a front bar