pontala1@gmail.com
Active member
I replace the heater core on my 03 Jetta TDI the power steering became hard noise and some oil did come out from the reservoir lead I have a error code on the vcd 00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
I was I reset the clock spring by following the procedures on Ross Tech website but it did not fix the problem on the power steering. Is there any electronics on the system? how can I troubleshot this? I believe I must disconnect something on behind the dash because it was working fine before I replace the heather core and radiator. Any help would be appreciated
thanks
005 - No or Incorrect Basic Setting / Adaptation
I was I reset the clock spring by following the procedures on Ross Tech website but it did not fix the problem on the power steering. Is there any electronics on the system? how can I troubleshot this? I believe I must disconnect something on behind the dash because it was working fine before I replace the heather core and radiator. Any help would be appreciated
thanks