Redman84
Veteran Member
I’ve been trying to cure my ABS/ESP dash lights. The code is 00285 for the front right wheel saying 012 - electrical fault in circuit. I replaced the sensor and cleaned the tone ring with no luck. Someone had obviously jacked w the wiring prior to me getting to it. I cut out bad wire and spliced it back in as I’ve read about but am still getting no reading from that wheel. I’ve been unable to trace the wire to its home base to test for continuity. Any ideas?
One more side note: Is there supposed to be wiring for brake wear sensors at each wheel or just on the driver’s side?
One more side note: Is there supposed to be wiring for brake wear sensors at each wheel or just on the driver’s side?