Macradiators.com
Veteran Member
Hi guys, its been a long time since i started the 2.0 CR project which had a happy ending, lots of things learned during the build. Car still drives ok.
For 2020 drag racing season i got an E92 330xd which is being build as we speak with the folowing:
-improved cooling
-intake mods
-fmic
-complete tiptronic service with XHP and custom software for drag racing by Completechip
-HPFP upgrade by Completechip + big injectors
-many other mods that make a difference
-suspensions and brakes, light rims, soft tires
-WMI
-full aluminum turbo-ic-intake piping
Software will be custom of course by Dragos from Completechip.
3 turbos will be tested:
in house built single turbo hybrid with big custom turbine wheel and compressor from Bobby Singh Racing, 450+hp target on this one.
Single turbo with special parts 480+hp target
In house built ceramic ball bearing biturbo with target of 500hp diesel only. We will be converting to biturbo setup which will be used for the season.
Now the car drives with the 1st setup to ensure that everything is ok before going on dyno, The other 2 turbo setups are being built.
From the workshop:
Everything new around the engine which was cleaned well and many parts replaced.
My goal for this season is to have a 11.0s car for the 1/4 mile drag. Anything in the 10.x seconds would be great of course.
Thanks to Bobby Singh for supplying me with turbo parts and advice and of course to friends (Dragos and Padre) who help build and tune the new toy.
In february we will be on dyno @Completechip. 60 days till 1st race
-
For 2020 drag racing season i got an E92 330xd which is being build as we speak with the folowing:
-improved cooling
-intake mods
-fmic
-complete tiptronic service with XHP and custom software for drag racing by Completechip
-HPFP upgrade by Completechip + big injectors
-many other mods that make a difference
-suspensions and brakes, light rims, soft tires
-WMI
-full aluminum turbo-ic-intake piping
Software will be custom of course by Dragos from Completechip.
3 turbos will be tested:
in house built single turbo hybrid with big custom turbine wheel and compressor from Bobby Singh Racing, 450+hp target on this one.
Single turbo with special parts 480+hp target
In house built ceramic ball bearing biturbo with target of 500hp diesel only. We will be converting to biturbo setup which will be used for the season.
Now the car drives with the 1st setup to ensure that everything is ok before going on dyno, The other 2 turbo setups are being built.
From the workshop:
Everything new around the engine which was cleaned well and many parts replaced.
My goal for this season is to have a 11.0s car for the 1/4 mile drag. Anything in the 10.x seconds would be great of course.
Thanks to Bobby Singh for supplying me with turbo parts and advice and of course to friends (Dragos and Padre) who help build and tune the new toy.
In february we will be on dyno @Completechip. 60 days till 1st race
-
Last edited: