Hello,
I replaced all of my relays below the steering column, hazard switch (2 times just to be sure), both light bulb socket housings for side markers on the upper fender, turning stalk (2 times just to be sure) and wiper stalk, cleaned all grounding points, replaced fuses and my turn signals won't engage (neither will high beams when fully pressed forward, pulling back will engage high beams temporarily as it should)
I keep getting 8.2-8.5 volts from the 22 & 23 fuse slots regardless if I have anything plugged in when I have the lights turned on. I have disconnected headlights, tail lights, relays, bulbs and I still get these results.
From fuse 2 (Turn signals) I get 5.4 volts when left signal is engaged and 4.8-5.4 volts (fluctuates semi rapidly) when the right signal is engaged. No lights show up on the dash or externally when the turn signal is engaged.
The only way the side makers come on is when I lock/unlock the car or when I press the hazard switch.
Any ideas? Thank you for your help and I have tried most of the ideas on this thread but no luck yet.