2004 tdi jetta auto to manual swap

hi i,m doing a auto to manual swap on my 2004 tdi bew jetta. it had a triptronic in it that is slipping in 5th n 4 gears (Trans Sucks).
i purchased a complete parts car with the same bew motor n 5 speed manual wich i need for the swap and its also the same year as my car.
my question is can i use the cluster and ecu,s (engine and trans)out of the donar car so i don,t have to find the pin to adaption mine?
or what else can i swap to get aroung this?
i have a vag-com cable but i don,t have vagtacho to get the pins infor

No need to change the gauge cluster or the ECU.

so all i need to do is use the tcm from the manual car?
don,t i need the code pin to make changes with vag-com?

tdog11473 said:

so all i need to do is use the tcm from the manual car?
don,t i need the code pin to make changes with vag-com?

Click to expand...

you need to do some reading first .... google "kill da auto wabbit" ... all your past and future questions can be answered before you run up an entire thread of Q&A on the exact same issues ... good luck !

TCM not required in a manual trans car. You cut the wiring and delete it all together. You have to code the ECU to manual trans from auto trans.

No pin needed.

Search for jetta 5 speed conversion on google. You will find a complete tutorial.