Jesus Is Lord
Veteran Member
- Joined
- Jan 24, 2014
- Location
- Hersey, MI
- TDI
- 2005 Passat TDI Wagon 144,000 2003 Eurovan VR6 2007 Touareg V10 TDI 158,000
I accidentally posted this in the Jetta "A3" area instead of Audi A3. So this is a repost.
We bought a 2010 Audi A3 TDI (CBEA engine) with no oil pressure. So after replacing the balance shafts and oil pump drive, it is fixed.
The turbo failed because of the low oil pressure, so I bought a used one with 35,000 miles, but it has quite a bit of shaft play.
I found this CHRA (Center Housing Rotating Assembly) built my Melett, but I am not 100% sure that it will fit. What do you think?
http://www.ebay.com/itm/391085673044...:MEBIDX:IT
We bought a 2010 Audi A3 TDI (CBEA engine) with no oil pressure. So after replacing the balance shafts and oil pump drive, it is fixed.
The turbo failed because of the low oil pressure, so I bought a used one with 35,000 miles, but it has quite a bit of shaft play.
I found this CHRA (Center Housing Rotating Assembly) built my Melett, but I am not 100% sure that it will fit. What do you think?
http://www.ebay.com/itm/391085673044...:MEBIDX:IT