Steering Wheel with Shifter Paddle

I am installing a new Steering Wheel on a 2009 Jetta SW TDI with shifter paddles and I have a question for Coding after installing it it .Ross-Tech Wiki gives a table for Control Module with Software Version 0101 or lower and 0110 or higher ,wher can you fin that info ? ,what type of version do I have.
Thanks in advance for the help.
VW Petrolero

VW Petrolero said:

I am installing a new Sttering Wheel on a 2009 Jetta SW TDI with shifter paddles and I have a question for Coding after installing it it .Ross-Tech Wiki gives a table for Control Module with Software Version 0101 or lower and 0110 or higher ,wher can you fin that info ? ,what type of version do I have.
Thanks in advance for the help.
VW Petrolero

Click to expand...

A VCDS (Vag-Com) scan of your steering wheel controller will show your software version. It will also show which controller module you have. If you have VCDS, post the steering wheel controller section (controller address 16). There is a good chance that you will have to replace the controller module. You will also have to buy a new steering wheel/airbag harness. There are a few issues with installing a MFSW in a 2009 JSW because you have the MFD control buttons on the wiper stalk. To get all the buttons to work, you might have to live with a fault code or else you can also replace the wiper stalk. It can be somewhat complicated.

You might want to read this: http://forums.tdiclub.com/showthread.php?t=225587

and maybe this: http://forums.tdiclub.com/showthread.php?t=278264

As you can see, it is not always as simple as you might think.

Have Fun!

Don