Ash03
Active member
Hi guys. I have a Vw polo 1.9 tdi pd130 with an asz engine. Been having turbo problems so i decided its time to replace the turbo.
I have a BorgWarner BV43 of a Hyundai Starex 2.5 CRDI 170HP.
Having done some research on this turbo, it seems to be abit different from the vw bv43.
I am not concerned about it not being a straight fit as i will get a manifold made up.
This bv43 has a part number: 5303 970 0145
I have measured the BILLET compressor wheel and got the ffg:
Inducer: 37.8mm
Exducer: 53.5mm
Which leaves me with a trim of around 50.
Has anybody used this exact turbo? What sort of power and boost can it hold? Does anybody happens to have a compressor map for it?
Any help/advice will be appreciated.
Sent from my SM-G531H using Tapatalk
I have a BorgWarner BV43 of a Hyundai Starex 2.5 CRDI 170HP.
Having done some research on this turbo, it seems to be abit different from the vw bv43.
I am not concerned about it not being a straight fit as i will get a manifold made up.
This bv43 has a part number: 5303 970 0145
I have measured the BILLET compressor wheel and got the ffg:
Inducer: 37.8mm
Exducer: 53.5mm
Which leaves me with a trim of around 50.
Has anybody used this exact turbo? What sort of power and boost can it hold? Does anybody happens to have a compressor map for it?
Any help/advice will be appreciated.
Sent from my SM-G531H using Tapatalk