what should i check/replace first on the BKD engine to cure the rough idle? ive checked with vcds and have 2 glow plugs, or wiring to them, that is faulty. also i find it takes quite a bit of cranking when its hot to start it. for now ive patched the idle issue by increasing the idle to 900rpm, though i can still feel the odd misfire.
is there a definitive test procedure/values in vcds to check which sensor is knackered?
i did some googling and found some people have replaced everything from the crank sensor to the fuel temp sensor.
is there a definitive test procedure/values in vcds to check which sensor is knackered?
i did some googling and found some people have replaced everything from the crank sensor to the fuel temp sensor.