Scratcher
Veteran Member
************SOLD PENDING FUNDS*************For Sale, is a Phillips & Tempro Zero-start Engine Block Heater. (As sold by Mr Frostheater: http://www.frostheater.com/ )
Model B IPX4.
Part no:3315039
Watts:1000
Volts 120 VAC
Amps 8.3
Specifically designed to fit the engine bay of the VW TDI Mk 6 a6 2010-2014 VW Golf, Jetta Sportwagen, and 2011+ Jetta TDI.
Mr Frostheater lists it as the HTR16 designed for the Manual transmission. This only refers to this hose configuration, Not the heater. If you are mechanically minded you will be able to make this fit any vehicle.
This a brand new, unused item that was bought for $149 but never installed. It has been tested and is in working condition. Instructions for installation can be found at. https://www.myturbodiesel.com/wiki/engine-coolant-block-heater-installation-on-tdi-frostheater/ (Please note that these instructions are for the Passat TDI using the same block heater with a different hose configuration. The basic principles are the same for installation in the Golf/Jetta/Sportwagen!!)
If you are mechanically minded this heater can also be used in any other vehicle simply by matching the hose sizes specific to that particular vehicle. There is no need to remove engine frost plugs as this is an external heater that is simply plumbed into the existing hose configuration on any vehicle. Price is $75 shipped on your dime, or local pickup.
Model B IPX4.
Part no:3315039
Watts:1000
Volts 120 VAC
Amps 8.3
Specifically designed to fit the engine bay of the VW TDI Mk 6 a6 2010-2014 VW Golf, Jetta Sportwagen, and 2011+ Jetta TDI.
Mr Frostheater lists it as the HTR16 designed for the Manual transmission. This only refers to this hose configuration, Not the heater. If you are mechanically minded you will be able to make this fit any vehicle.
This a brand new, unused item that was bought for $149 but never installed. It has been tested and is in working condition. Instructions for installation can be found at. https://www.myturbodiesel.com/wiki/engine-coolant-block-heater-installation-on-tdi-frostheater/ (Please note that these instructions are for the Passat TDI using the same block heater with a different hose configuration. The basic principles are the same for installation in the Golf/Jetta/Sportwagen!!)
If you are mechanically minded this heater can also be used in any other vehicle simply by matching the hose sizes specific to that particular vehicle. There is no need to remove engine frost plugs as this is an external heater that is simply plumbed into the existing hose configuration on any vehicle. Price is $75 shipped on your dime, or local pickup.
Last edited: