Is it turbo problem ?

edzha90

Well-known member
Joined
Jul 5, 2014
Location
Europe
TDI
1.9
I drove above 120km/h when I felt power lack, I couldn't speed up more.

VCD's lite lite found this error

VCDS-Lite Version: Release 1.2
Tuesday, 07 October 2014, 19:48:15.
Control Module Part Number: 038 906 018 FE
Component and/or Version: 1,9l R4 EDC 0000SG 2149
Software Coding: 00002
Work Shop Code: WSC 00028
VCID: 5ECF1D7BC92F
1 Fault Found:
17958 - Charge Pressure: Control Deviation
P1550 - 35-00 - -


Also I have heating problem - http://forums.tdiclub.com/showthread.php?p=4633968#post4633968

any reply would appreciate.
 

edzha90

Well-known member
Joined
Jul 5, 2014
Location
Europe
TDI
1.9
It was okay for couple days, today again after city driving speed once I am on motorway after couple miles my car didn't won't go more than 75mph...
also then I checked with VCDS and I received different fault, any ideas guys? thanks
2 Faults Found:
00741 - Brake Pedal Monitoring
27-00 - Implausible Signal
17958 - Shareware Version. To Decode all DTCs
P1550 - 35-00 - Please Register/Activate
 

Seatman

Top Post Dawg
Joined
Apr 23, 2010
Location
Scotland
TDI
2014 Skoda rapid elegance 1.6 cr tdi
I suspect you've got a sticky vnt mech in the turbo causing the first issue, the second one could either be the brake switch or even the brake light bulbs.
 

edzha90

Well-known member
Joined
Jul 5, 2014
Location
Europe
TDI
1.9
Is there any way how to check if that is 100% 'sticky vnt mech' ?
if it is, is it fixable without garage help ?

I have an extra light on rear side(diode light) bottom side of rear window I connected diode light wires with boot light also on same time I had problems with bulb holder as my one light didn't work so I took all of them off and tried to find the problem, I fix the problem using the screwdriver (to take off the rusty part) as one side of connector was a bit rusty.

After that I found problem related to brake fault error. I want to get rid off that fault otherwise on my dashboard there is yellow spiral symbol, once I get cleaned my errors that spiral disappears but it's back in 5 min.. what could be a problem ?
 
Top