CR140 Stage 3 install DIY

VW is doing emissions fix to my car next week, so I can finally get around to installing the stage 3 kit I've had for a while.

Does anyone know where I might find a write up or DIY of how to install the kit? I know there was one out there somewhere, but I can't find it now.

Thanks for your assistance!

This should help a bit

http://www.myturbodiesel.com/wiki/turbo-removal-crd-vw-and-audi-tdi-2-0l-engine/

The Rawtek instructions are pretty good for the DPF delete.

Doesnt stage 3 imply big turbo and some heavy tuning on the other side of the lake?

Macradiators.com said:

Doesnt stage 3 imply big turbo and some heavy tuning on the other side of the lake?

Click to expand...

Yes big turbo and all other parts that needed to upgrade comes in stage 2. Stage 3 usually means adding another turbo or nos or what so ever.

diffas said:

Yes big turbo and all other parts that needed to upgrade comes in stage 2. Stage 3 usually means adding another turbo or nos or what so ever.

Click to expand...

Yes, correct. Turbo swap + downpipe. Thanks for the link and the Rawtech idea.

Macradiators.com said:

Doesnt stage 3 imply big turbo and some heavy tuning on the other side of the lake?

Click to expand...

Stage 3 on the CR's over here generally entails using a CR170 turbo. So it's a little bigger, but still a pretty small, quick spooling unit.