Bigtoy302
Active member
Started on my 2002 double cab project last week finally after a long time of planning and gathering parts.
2002 Toyota Tacoma double cab PreRunner.
2013 CJAA CR 2.0 TDI
R150F 5 speed trans
10" LC engineering dual comp clutch
97 Land cruiser FJ80 axles (Elocked rear, Open front) linked front and rear on coils.
285/70/17 BFG muds
17" Procomp wheels.
I machined my own adapter for this swap to use the R150f trans, clutch, flywheel and stock starter.
Engine will be stock for now with a GTB1752vz turbo. I have another engine I will be building while working the bugs out of the truck first. That engine I will be porting the head, and doing Colt stage 2 cams with Mecevo springs. Also Tuscan rods and ARP head studs and a R70 CP3 pump. I will also be doing compound turbos ,GTB1752vc and a GTX2867R. I already have all these parts minus the head studs.
2002 Toyota Tacoma double cab PreRunner.
2013 CJAA CR 2.0 TDI
R150F 5 speed trans
10" LC engineering dual comp clutch
97 Land cruiser FJ80 axles (Elocked rear, Open front) linked front and rear on coils.
285/70/17 BFG muds
17" Procomp wheels.
I machined my own adapter for this swap to use the R150f trans, clutch, flywheel and stock starter.
Engine will be stock for now with a GTB1752vz turbo. I have another engine I will be building while working the bugs out of the truck first. That engine I will be porting the head, and doing Colt stage 2 cams with Mecevo springs. Also Tuscan rods and ARP head studs and a R70 CP3 pump. I will also be doing compound turbos ,GTB1752vc and a GTX2867R. I already have all these parts minus the head studs.