jefem24
Veteran Member
My blower fan for my ac isnt working right. If i have it on 3 its fine..if i put it to 4 it tops working. Is it just overheating?
TIA Jeff
TIA Jeff
__. The usual symptom with the resistor pack is "nothing on setting 1 thru 3 but runs OK (full speed) on 4". Not like yours at all - I'm guessing switch too.jefem24 said:saw a few posts about the resistor pack that seem possible but my next question is....(snip)
__. ... accident with the deer ... hmmm. The "fan control module" works the fans on the radiator. The usual failure mode there is that the blower motor inside the car runs OK but it doesn't put out any cool air. I'm pretty sure it's not fan control module. But body crunching accidents can cause elecrical gremlins.jefem24 said:im wondering if maybe the fan control module was damaged in the accident with the deer and is causing this problem if anyone can point me to a thread with a similar problem to this please do i cant find anything lik eit lots of the opposite not working on 123 but working on 4
I'm dealing with same problem right now. I just replaced the fan switch, along with all the other switches down there, they are one unit. This did not solve my problem. This is what VW said the problem waskirkdiefrost said:Here is my case scenario:
My ac works fine on 1st setting but when I turn the knob to 2-4 the ac button turns off along with the blower fan...what could that be?