www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You




Go Back   TDIClub Forums > VW TDI Discussion Areas > TDI Power Enhancements

TDI Power Enhancements Discussions about increasing the power of your TDI engine. i.e. chips, injectors, powerboxes, clutches, etc. Handling, suspensions, wheels, type discussion should be put into the "Upgrades (non TDI Engine related)" forum. Non TDI vehicle related postings will be moved or removed. Please note the Performance Disclaimer.

Reply
 
Thread Tools
Old December 26th, 2017, 03:30   #1
FRITS91
Member
 
Join Date: May 2015
Location: Belarus, Minsk
Default dq500 dsg7 4x4 with edc15 afn/teves mk20

good afternoon.
I collect the information for the installation of the gearbox Dq500(dsg7) 4x4 in the body of mk1 1.9tdi afn edc15.
abs mk20. haldex gene1 work on the factory scheme through the can.
is interested in how the dq500 works. Will it understand the signals from the EDC15 on the can bus and what other problems can there be in installing the dq500 paired with the edc15v and the teves mk20 abs
__________________
VW Passat B3 TDI Syncro
http://www.drive2.ru/r/volkswagen/1132946/
FRITS91 is offline   Reply With Quote
Old December 26th, 2017, 08:09   #2
mrchill
TDIClub Enthusiast
Super Secret Diesel Ninja Vendor
w/Business number
 
mrchill's Avatar
 
Join Date: Sep 2003
Location: MASS! home of THE WORLD SERIES CHAMPION RED SOX! x 2!
Default

check with macradiators.com on this site. He has done a dq500 conversion and may be able to help.
__________________
How do you know you are alive if you are not miserable?

If you were traveling at the speed of light, and you turned your lights on......would anything happen?

What if the hokey pokey really is what it's all about?

You will get NOTHING! And you WILL be GRATEFUL!
mrchill is offline   Reply With Quote
Old December 26th, 2017, 11:19   #3
FRITS91
Member
 
Join Date: May 2015
Location: Belarus, Minsk
Default

Thank you. in private messages asked.
according to the SSP vw scheme, abs is required with esp. I have a simple abs, without ESP
__________________
VW Passat B3 TDI Syncro
http://www.drive2.ru/r/volkswagen/1132946/
FRITS91 is offline   Reply With Quote
Old December 26th, 2017, 16:00   #4
m1ketdi
Veteran Member
 
Join Date: May 2009
Location: Leam
TDI(s): Leon BKD
Fuel Economy: 50+mpg
Default

I doubt an EDC15 will be good enough for dq500... It doesn't have a torque based strutcture to allow torque requests from the gearbox etc.
m1ketdi is offline   Reply With Quote
Old December 28th, 2017, 12:41   #5
Lucian189
Veteran Member
 
Join Date: Jan 2011
Location: Romania
TDI(s): 3.0 TDI CR
Fuel Economy: What's that for?
Default

Olso can is older ,so you will get no comunication between engine ecu and dq ecu.
Best you could try with edc16 ecu ,that will do
Lucian189 is offline   Reply With Quote
Old December 28th, 2017, 12:50   #6
m1ketdi
Veteran Member
 
Join Date: May 2009
Location: Leam
TDI(s): Leon BKD
Fuel Economy: 50+mpg
Default

Quote:
Originally Posted by Lucian189 View Post
Olso can is older ,so you will get no comunication between engine ecu and dq ecu.
Best you could try with edc16 ecu ,that will do
EDC16 with VP pump? - Don't know anyone doing that?
m1ketdi is offline   Reply With Quote
Old December 28th, 2017, 13:10   #7
Lucian189
Veteran Member
 
Join Date: Jan 2011
Location: Romania
TDI(s): 3.0 TDI CR
Fuel Economy: What's that for?
Default

Install pd...not vp then with edc16 you could get that dq working.
Lucian189 is offline   Reply With Quote
Old December 28th, 2017, 14:04   #8
m1ketdi
Veteran Member
 
Join Date: May 2009
Location: Leam
TDI(s): Leon BKD
Fuel Economy: 50+mpg
Default

Quote:
Originally Posted by Lucian189 View Post
Install pd...not vp then with edc16 you could get that dq working.
How does that help the original poster who wants to run dsg on a vp?
m1ketdi is offline   Reply With Quote
Old December 29th, 2017, 07:55   #9
sam-
Member
 
Join Date: Oct 2008
Location: Belgium
Default

Probably a dsg standalone controller like Boba use :

https://www.youtube.com/watch?v=FCzv4x13B34

"DSG controller from Andrenalin Tuning"
http://www.adrenalintuning.de/

You might email them as there isnt any informations on their website.
sam- is offline   Reply With Quote
Old December 30th, 2017, 02:50   #10
ryanp
 
ryanp's Avatar
Default

Quote:
Originally Posted by sam- View Post
Probably a dsg standalone controller like Boba use :

https://www.youtube.com/watch?v=FCzv4x13B34

"DSG controller from Andrenalin Tuning"
http://www.adrenalintuning.de/

You might email them as there isnt any informations on their website.
They rarely reply to emails about that stuff
__________________

02M 6 Speed Conversions + Euro Parts - 6 Speed Setups for A4 + A5 platform,PD150 Intakes, TIP kits, Turbo's, Injectors as well as anything else!! PM Me! - Click HERE
ryanp is offline   Reply With Quote
Old January 4th, 2018, 23:35   #11
FRITS91
Member
 
Join Date: May 2015
Location: Belarus, Minsk
Default

dq500 until the installation is debugged.
while we put the dq250 in another mono-drive golf 1.
it turns out that it is necessary to make a data converter on the bus - that would turn milligrams into a torque ... does anyone have any experience of manual correction of the firmware dsg? Is it possible to simply scroll the mechatronics to work without an engine - only in terms of the speed of rotation of the shafts? these projects are designed for drag . The main fast switching up and strong clutch pressure
__________________
VW Passat B3 TDI Syncro
http://www.drive2.ru/r/volkswagen/1132946/
FRITS91 is offline   Reply With Quote
Old January 8th, 2018, 01:00   #12
Alexey ACV
Newbie
 
Alexey ACV's Avatar
 
Join Date: Jun 2010
Location: Sankt-Petersburg,Russia
Default

Quote:
Originally Posted by FRITS91 View Post
dq500 until the installation is debugged.
while we put the dq250 in another mono-drive golf 1.
it turns out that it is necessary to make a data converter on the bus - that would turn milligrams into a torque ... does anyone have any experience of manual correction of the firmware dsg? Is it possible to simply scroll the mechatronics to work without an engine - only in terms of the speed of rotation of the shafts? these projects are designed for drag . The main fast switching up and strong clutch pressure
Look like its none possible let it work without main data by canbus. So a german guys make a right choice to convert analog inputs by controller to can . And for sure they can map it when it need. (pressure,lauchcontrol..etc.) I make it with stock dsg contorlers few times and its realy have nm likes edc/med17,16
__________________
powerTDI4ever!
Alexey ACV is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DSG 02E to DQ500 7speed SWAP, ratios needed Macradiators.com Upgrades (non TDI Engine related) 0 September 29th, 2016 15:10
Issues with Teves 20 upgrade on Corrado Purple Tom Upgrades (non TDI Engine related) 1 August 10th, 2013 05:58
Polo 6R 2012 TDI DSG7 or Manual daniell Other VW Group TD(I)s 4 May 9th, 2012 20:43
Teves 04 G101 Sensor & 01276 ninedee_golf_tdi VW MKIII-A3/B4 TDIs 6 August 24th, 2011 04:53
Help! ABS Woes... 96 B4 Teves 20 ABS/EDL Nate_Grauvogel VW MKIII-A3/B4 TDIs 8 July 6th, 2006 09:54


All times are GMT -7. The time now is 01:37.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.13383 seconds with 12 queries
[Output: 108.35 Kb. compressed to 91.35 Kb. by saving 17.00 Kb. (15.69%)]