View Single Post
Old April 24th, 2010, 19:24   #12
Shawn_alh
Newbie
 
Join Date: Mar 2009
Location: BC Canada
TDI(s): ALH
Default

Quote:
Originally Posted by FlyTDI Guy
The voltage range is the same but... they represent different ranges. In other words, with the OEM 1.5 bar might return 3v to the ECU. With the 3 bar map, the same 1.5 bar only returns 2.5v. At idle, your ECU knows ambient, say 1000 mbar. Your map sensor, however, is returning lower than expected and they don't match. Some people can run a 3 bar map and not have any bad symptoms, most need to update the maps in their ECU to truly make it work right. Short answer, if you're going to run a 3 bar map, you need to tune for it. That means re-mapping the ECU.
thank you for the answer

am i going to wreck/hurt anything from now till i do the turbo 3-4 months
Shawn_alh is offline   Reply With Quote
 
Page generated in 0.07530 seconds with 8 queries
[Output: 14.85 Kb. compressed to 13.38 Kb. by saving 1.47 Kb. (9.92%)]