ryanp
Vendor
- Joined
- Jun 22, 2008
- Location
- Barnsley, South Yorkshire, UK
- TDI
- Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
Hi,
The time has come for me to sell my Mental Mk3 TDI Turbo Setup. I have decided that I should practise what I preach and I am fitting one of my GTB2260VK Turbo Kits to the Mk2 instead of this.
Here are the juicy details:
Turbo - GT2560BB - Ball Bearing and Watercooled
Turbine: 53mm inducer, 62 trim, .64 A/R
Compressor: 46.5mm inducer, 60mm exducer, 60trim, 0.60 A/R
The turbo has only covered 1500 miles from new:
Mk3 Engine Bay:
Tubular Exhaust Manifold (Built by Russ Fellows) - Sits Turbo over Gearbox
2.75" Downpipe
Custom Huge plenum Inlet manifold
2" Intercooler Pipes (Mandrel SS and silicone couplings)
Huge FMIC Intercooler
Braided Oil Feed and Return lines
All watercooling pipes and secondary pump
This is a dyno printout on the previous non-Hybrid/Ball Bearing T25:
With the New BB Turbo, at 2.2 bar of boost I got wheel spin well over 70mph on the road.
This is basically a complete setup to bolt onto a Mk3 Golf 1.9 TDI. I was going to modify the boost pipes to use in my MK2 Golf, but I have had a change of plan.
I am looking for around £1200for this kit. Bearing in mind the turbo was £1000 on its own only 1500 Miles ago. Also, Russ Fellows manifolds are stupidly expensive. He builds crazy racecars for a living:
http://www.youtube.com/watch?v=uwrgFxkIbPI
I can ship this kit anywhere in the world. I would estimate £120 for shipping to the USA/Canada.
If you need any more information on the kit, please post here so everyone can see.
Thanks!
Ryan
The time has come for me to sell my Mental Mk3 TDI Turbo Setup. I have decided that I should practise what I preach and I am fitting one of my GTB2260VK Turbo Kits to the Mk2 instead of this.
Here are the juicy details:
Turbo - GT2560BB - Ball Bearing and Watercooled
Turbine: 53mm inducer, 62 trim, .64 A/R
Compressor: 46.5mm inducer, 60mm exducer, 60trim, 0.60 A/R
The turbo has only covered 1500 miles from new:
Mk3 Engine Bay:
Tubular Exhaust Manifold (Built by Russ Fellows) - Sits Turbo over Gearbox
2.75" Downpipe
Custom Huge plenum Inlet manifold
2" Intercooler Pipes (Mandrel SS and silicone couplings)
Huge FMIC Intercooler
Braided Oil Feed and Return lines
All watercooling pipes and secondary pump
This is a dyno printout on the previous non-Hybrid/Ball Bearing T25:
With the New BB Turbo, at 2.2 bar of boost I got wheel spin well over 70mph on the road.
This is basically a complete setup to bolt onto a Mk3 Golf 1.9 TDI. I was going to modify the boost pipes to use in my MK2 Golf, but I have had a change of plan.
I am looking for around £1200for this kit. Bearing in mind the turbo was £1000 on its own only 1500 Miles ago. Also, Russ Fellows manifolds are stupidly expensive. He builds crazy racecars for a living:
http://www.youtube.com/watch?v=uwrgFxkIbPI
I can ship this kit anywhere in the world. I would estimate £120 for shipping to the USA/Canada.
If you need any more information on the kit, please post here so everyone can see.
Thanks!
Ryan