RYAN P's 6 speed 02M Conversions and ALL Euro TDI Parts

boertje

Veteran Member
Joined
May 24, 2002
Location
Coeur d'Alene, ID
TDI
'01, '01, '03, ‘06 NB - TDIs all.
Anybody knows on what car we can find this driver side axle PN : 1J0407271GC
I'm trying to cross reference the part, but can't seem to find the donnor car.
Thanks
That axle OEM is hard to find, but the new beetle turbo S or as far as that goes, any of the mkiv gasser cars with the 6 speed will have them such as the 1.8T with six speed 02M.
1J0 407 271 GC x1 left drive shaft* (1JO 407 451 PX) Löbro 304351 GKN (EKG 923769, Spidan 23769) are other part numbers.
If you are trying to repair your axle and you want OEM original quality, Raxles is the best bet. Not cheap, but your shaft will be rebuilt back to original using OEM parts. Last year that cost was close to $250 but you get what you pay for. I've done this with two left axles and I was VERY impressed.
Ryanp should be able to get OEM axle parts for these axles as well, or at least point you in the right direction.
Joint part numbers are:
CV joints outer left and right 1JO 498 099 E Löbro 303551 GKN (EKG 921522, Spidan 21522) CV joint gear box side 1JO 498 103 E Löbro 302464 GKN (EKG 922902, Spidan 22902)
Boot outer 3B0 498 203 E Löbro 303552 GKN (EKG 921524, Spidan 21524)
Boot inner 1JO 498 201 E Löbro 304113 GKN (EKG 923176, Spidan 23176)
 

CRD4me

Veteran Member
Joined
Apr 15, 2014
Location
Canada
TDI
MB CRD & VW PD
Boertj,
Thank you very much.
This will help lots of people with 6speed axle problems.
Here is something else to add.
Inner part of drive shaft :
1J0498103EX or
8N0498103A or
1J0407331D
End cap : 1J0407115H
 

bobbiemartin

Veteran Member
Joined
Jul 16, 2012
Location
Jacksonville, FL
TDI
2010 Tiguan TDI 4Motion, Jeep Grand Cherokee 3.0 CRD
I would add (assuming you have the TDI hubs/brakes) make sure you get an axle with the nut outer CV joint. Some gasser 6 speeds used a bolt in the outer CV joint and they are not interchangeable!
If you can't find an axle, ECS has the VW reman axles. The price looks a bit high, but you get $200 core refund when you send your axle back.
 

boertje

Veteran Member
Joined
May 24, 2002
Location
Coeur d'Alene, ID
TDI
'01, '01, '03, ‘06 NB - TDIs all.
Boertj,
Thank you very much.
This will help lots of people with 6speed axle problems.
Here is something else to add.
Inner part of drive shaft :
1J0498103EX or
8N0498103A or
1J0407331D
End cap : 1J0407115H
Thanks!
I would add (assuming you have the TDI hubs/brakes) make sure you get an axle with the nut outer CV joint. Some gasser 6 speeds used a bolt in the outer CV joint and they are not interchangeable!
If you can't find an axle, ECS has the VW reman axles. The price looks a bit high, but you get $200 core refund when you send your axle back.
True on the nut vs bolt versions. Be aware of part numbers for the axles and one should be fine. The one ECS lists is indeed the OEM rebuilt part number for the 1J0 407 271 GC x1 left drive shaft* (1JO 407 451 PX is the rebuilt OEM part number) and is pricey even after core.
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
I can supply shafts alone if it helps.
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
That's a TT part so no it won't work unless you have TT or 20th anniversary hubs
 

Dieselboy

Well-known member
Joined
Jul 3, 2012
Location
Kutztown,Pa moved to Madrid,NE
TDI
2002 Jetta TDI, 1981 Caddy Tdi ALH Swap
Ok i cant read the part number on the old axle. I believe that this car has one of your swaps in it. The hubs measure 108mm. Cant seem to find the correct axle anywhere.
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
Do you need the long or short shaft? I have lots in stock so can have one with you before the middle of next week!
 

cypressnl

New member
Joined
Jul 13, 2017
Location
NL
TDI
seat ibiza 6k2
Hello,

Can someone tell me wich axle or CV-joint i need for a Seat ibiza 6k2 cupra (1.8t) ?
I already got an 6 speed gearbox (costum made) and clutch etc.
Does someone know a way to mount proppely ? Mayby to buy the left rear mount.
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
We have a few 6 speeds leaving this week!!
 

CasaEd

Veteran Member
Joined
Mar 18, 2017
Location
Portugal
TDI
VW Passat TDi B4, VW Passat TDi B4 GL, VW Passat B3 PD AWX Conversion
Hi ryanp,

Do you have any 2011 Passat 6 speed Gearbox Code MYP for sale ?

Thanks
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
Hi ryanp,

Do you have any 2011 Passat 6 speed Gearbox Code MYP for sale ?

Thanks
I can certainly get one, they are the 02S gearbox which is just a 5 speed with a 6th on the end and not as strong as 02M/02Q
 

CasaEd

Veteran Member
Joined
Mar 18, 2017
Location
Portugal
TDI
VW Passat TDi B4, VW Passat TDi B4 GL, VW Passat B3 PD AWX Conversion
I have a B4 passat and the MYP is a more easy conversion, only downside is no speedo drive and a box strip to fit one. What kind of price would it be shipped ?

Thanks
 

Judson

Veteran Member
Joined
Jan 18, 2001
Location
Cheyenne, WY
TDI
2001 Jetta
Thanks again to Ryan and company for my DRW six-speed conversion. All gears feel excellent, and the limited slip has made a big difference driving around the snowing streets of Cheyenne, Wyoming. The clutch/flywheel combo is so damned smooth that I don't think I'll ever, ever do a lightened flywheel again (at least in a TDI), and the engine is much quieter and happier to boot.
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
Glad you are happy with the kit, I still have plenty in stock should anyone want a kit, Shipping is very quick!!
 

ryanp

Vendor
Joined
Jun 22, 2008
Location
Barnsley, South Yorkshire, UK
TDI
Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
Still plenty of parts in stock, Looking for someone in the USA to take a bulk shipment of Euro goodies if anyone is interested, combining shipping will mean good profit margins!

PM Me!
 
Top