Hello guys
When i bought the car the vanes on the vnt mechasnism were siezed so i removed the turbochager to clean the vanes but i couldn't dissassemble the mechanism due to the rusted out bolts so i just worked loose the vanes with some wd-40 and flushed some of the gunk out. After that the turbocharger worked fine and it made a lot of boost.
After that i wanted to make some more power so i got an remap, maxed out the smoke limiter and torque limiter but I noticed that the turbocharger could'nt keep up with my demand. At about 100mph in fifth gear the air quantity drops to about 600mg/stroke and it does not make any more power because of the smoke limit. After that i tried to increase the boost regulation duty cycle slightly but the turbo just could not keep up.
So now after about 5000km the vnt started sticking again so i am considering to get an more powerful turbocharger.
The current turbo is an garrett vnt15 with the exhaust manifold integrated and the exit has an three bolt mount.
I will most probably try to get an second hand turbocharger but i want to ask you guys which one could i get that would fit without any or some modifications.
Could a turbocharger from a 130hp 1.9 pd tdi fit, or should i get it from a 110hp 1.9 tdi?
When i bought the car the vanes on the vnt mechasnism were siezed so i removed the turbochager to clean the vanes but i couldn't dissassemble the mechanism due to the rusted out bolts so i just worked loose the vanes with some wd-40 and flushed some of the gunk out. After that the turbocharger worked fine and it made a lot of boost.
After that i wanted to make some more power so i got an remap, maxed out the smoke limiter and torque limiter but I noticed that the turbocharger could'nt keep up with my demand. At about 100mph in fifth gear the air quantity drops to about 600mg/stroke and it does not make any more power because of the smoke limit. After that i tried to increase the boost regulation duty cycle slightly but the turbo just could not keep up.
So now after about 5000km the vnt started sticking again so i am considering to get an more powerful turbocharger.
The current turbo is an garrett vnt15 with the exhaust manifold integrated and the exit has an three bolt mount.
I will most probably try to get an second hand turbocharger but i want to ask you guys which one could i get that would fit without any or some modifications.
Could a turbocharger from a 130hp 1.9 pd tdi fit, or should i get it from a 110hp 1.9 tdi?