View Single Post
Old September 15th, 2019, 13:24   #8
Join Date: Jan 2001
Location: mi 48836
Fuel Economy: 53 max, 42 min, average 46

Originally Posted by Texas_sky View Post
Ok thanks, I'll turn the transmission upside down and take a look at the code to determine what vehicle it came from and report back.

It is not on the bottom. It is on the top side under the bracket next to the transmission mount. You will have to support the transmission from underneath and remove the 4 bolts that mount the bracket. Then lower the transmission a bit so you can see under the bracket or detach it from the chassis mount and slide it to the side . Didn't I tell you how inconvenient it was?
If your trans is dirty and corroded you might have a hell of a time trying to read it. That is the only place that I know of where the trans is marked with the code. I don't think that it is identified in the software if you to call up the trans controller with VCDS.
If you still don't understand where it is I can get a pic of it.
1999.5 a4 Jetta, port matched, RC2, sprint 520's, 1.5" lift kit
1996 Passat B4V, coat hanger supported exhaust system,
Visit me
JETaah is offline   Reply With Quote
Page generated in 0.05441 seconds with 8 queries
[Output: 15.86 Kb. compressed to 14.30 Kb. by saving 1.56 Kb. (9.85%)]