Thread: ALH TDI pinout.
View Single Post
Old January 14th, 2017, 17:51   #67
Fix_Until_Broke
Veteran Member
 
Fix_Until_Broke's Avatar
 
Join Date: Aug 2004
Location: Menomonee Falls, Wisconsin, USA
Fuel Economy: 75.0/53.0/38.4
Default

I pinned this out today...

Pin 1 = Ground
Pin 2 = Temperature - voltage goes up as temperatures go down - Has 5v pull up
Pin 3 = 5vdc Supply
Pin 4 = Pressure - voltage goes up as pressure goes up - Has ~55k ohm pull down resistor
__________________
03 Jetta, Cat 2u, DG Steel SP w/MOGolf Mod, 3"DP, 4"EXH, EaBP100 Bypass, Euroswitch, ECodes, Driving Light, PD Lift Pump, R520's, RC5,RC6, TDTuning, Malone, ScanGaugeII, 3" TIP, 2" TOP, HE221W Compounded with GTC1444VZ, 6 Bar MAP, VR6 MAF, Vented Fender Liner, Battery Cover Mod, 11mm, Monster Mats, 215/55/17 (27.9/53.0/75) Monthly MPG Links, Euro Trunk Latch, IDParts RSB, SDI or ALH Intake, ARL Ceramic Pistons, Rosten Rods, DRW, Wavetrac, SBC, FSD's, Beef Springs, Rebuilt Head, Recaro's, Colt II, DG Sigma 6, RMT200

Last edited by Fix_Until_Broke; January 15th, 2017 at 19:45. Reason: Added more info
Fix_Until_Broke is online now   Reply With Quote
 
Page generated in 0.07259 seconds with 8 queries
[Output: 17.40 Kb. compressed to 15.59 Kb. by saving 1.80 Kb. (10.36%)]