Rammstein
Top Post Dawg
Ok, so it seems that there's a lot of questions now on how to remove the light switch and so on.
The "How to" for the DRL will follow after I typed this one out. /images/graemlins/grin.gif /images/graemlins/cool.gif
First, you got a B4 interior.
Second you have the HVAC vents.
Press the center vent down.
Then, more down (always be gentle, but here you may have to force it down until it unclips)!!!
Play with it, it should come out easily.
There should be a screw there, abscent on this pic, don't know where it is. Well, there should be a screw there anyway, so unscrew it (philips head).
Same thing for the vent on top of the light switch (look at my beautiful Euroswitch! /images/graemlins/cool.gif). Push...
Push more until it's horizontal.
Remove it and remove the screw that I'm pointing with my screwdriver.
With a small flat tip screwdriver, bring the plastic trim that surrounds the cluster out a little bit (as far as it goes). Carefull: this piece is very fragile! /images/graemlins/eek.gif
Take only the part of the light switch that you can really pull on it without fear of breaking it.
With the little screwdriver take the lightswitch out gently.
Do everything in the reverse order to put the switch back in place.
Done! /images/graemlins/cool.gif
As some of you will see, I have not removed the last screw.
The switch came right out with little problem.
I'm missing quite a few screws holding the plastic trim around the cluster, so the switch comes off quite easily.
If you have all the bolts...remove them first or brake everything.
Also, I removed the vents so I have more room to take the pictures.
You can just rotate the vents, remove the screws and the switch.
How to disable DRL's coming next, stay tuned! /images/graemlins/grin.gif
The "How to" for the DRL will follow after I typed this one out. /images/graemlins/grin.gif /images/graemlins/cool.gif
First, you got a B4 interior.
Second you have the HVAC vents.
Press the center vent down.
Then, more down (always be gentle, but here you may have to force it down until it unclips)!!!
Play with it, it should come out easily.
There should be a screw there, abscent on this pic, don't know where it is. Well, there should be a screw there anyway, so unscrew it (philips head).
Same thing for the vent on top of the light switch (look at my beautiful Euroswitch! /images/graemlins/cool.gif). Push...
Push more until it's horizontal.
Remove it and remove the screw that I'm pointing with my screwdriver.
With a small flat tip screwdriver, bring the plastic trim that surrounds the cluster out a little bit (as far as it goes). Carefull: this piece is very fragile! /images/graemlins/eek.gif
Take only the part of the light switch that you can really pull on it without fear of breaking it.
With the little screwdriver take the lightswitch out gently.
Do everything in the reverse order to put the switch back in place.
Done! /images/graemlins/cool.gif
As some of you will see, I have not removed the last screw.
The switch came right out with little problem.
I'm missing quite a few screws holding the plastic trim around the cluster, so the switch comes off quite easily.
If you have all the bolts...remove them first or brake everything.
Also, I removed the vents so I have more room to take the pictures.
You can just rotate the vents, remove the screws and the switch.
How to disable DRL's coming next, stay tuned! /images/graemlins/grin.gif