2-Stroke Freak
Active member
I need to replace my inner CV joints on my 03 Wagon. Is there a how to thread that somone can link me to??
Thanks!
Thanks!
Last edited:
Ok, I just reread this post a couple of times....So if you were able to disassemble the unit ON the axle, I should be able to Assemble the unit on the axle right?dirtysouthjacket said:Take off the spring clip with a pair of needle nose pliers and a small screwdriver. Be careful because it can go flying. Then just use a plastic hammer or punch to drive the CV joint of the splines. I marked the direction first and dissembled the balls and outer cage first, before I drove off the inner. Pretty simple.
Excellent article thanks. I don't know how many iterations of "CV rebuild", etc I searched for!!ninedee_golf_tdi said: