theodore
Active member
I carefully removed WVO controller, switches, etc. Most all of the wires i cut were "T" splices(hope you know what i mean), The fuel solenoid doesnt seems to open, but power is in the plug(test light). I can open it w/jumper and yes fuel to injectors.
VCDS codes below,
Address 01: Engine Labels: 028-906-021-AHU.lbl
Control Module Part Number: 028 906 021 GQ
Component and/or Version: 1,9l R4 EDC G40SG 1420
Software Coding: 00002
Work Shop Code: WSC 25051
VCID: 64CDB249F4409E9
8 Faults Found:
00527 - Intake Manifold Temperature Sensor (G72)
30-10 - Open or Short to Plus - Intermittent
00522 - Engine Coolant Temperature Sensor (G62)
30-00 - Open or Short to Plus
01269 - Commencement of Injection Valve (N108)
31-10 - Open or Short to Ground - Intermittent
00765 - Modulating Piston Movement Sensor (G149)
35-00 - -
01268 - Quantity Adjuster (N146)
35-00 - -
01268 - Quantity Adjuster (N146)
27-00 - Implausible Signal
00539 - Fuel Temperature Sensor (G81)
30-00 - Open or Short to Plus
00542 - Needle lift Sensor (G80)
30-00 - Open or Short to Plus
Readiness: N/A
Wires is my weakness, oh my time to start training, reading up and listening to the good advice found here!
Thank you,
Theo
VCDS codes below,
Address 01: Engine Labels: 028-906-021-AHU.lbl
Control Module Part Number: 028 906 021 GQ
Component and/or Version: 1,9l R4 EDC G40SG 1420
Software Coding: 00002
Work Shop Code: WSC 25051
VCID: 64CDB249F4409E9
8 Faults Found:
00527 - Intake Manifold Temperature Sensor (G72)
30-10 - Open or Short to Plus - Intermittent
00522 - Engine Coolant Temperature Sensor (G62)
30-00 - Open or Short to Plus
01269 - Commencement of Injection Valve (N108)
31-10 - Open or Short to Ground - Intermittent
00765 - Modulating Piston Movement Sensor (G149)
35-00 - -
01268 - Quantity Adjuster (N146)
35-00 - -
01268 - Quantity Adjuster (N146)
27-00 - Implausible Signal
00539 - Fuel Temperature Sensor (G81)
30-00 - Open or Short to Plus
00542 - Needle lift Sensor (G80)
30-00 - Open or Short to Plus
Readiness: N/A
Wires is my weakness, oh my time to start training, reading up and listening to the good advice found here!
Thank you,
Theo