View Single Post
Old September 28th, 2019, 01:53   #6
rudder_nz
Newbie
 
Join Date: Jun 2018
Location: Wellington
Default

Quote:
Originally Posted by Henrick View Post
If you suspect a falty sensor, start by checking/logging (using VCDS) the Coolant Temp Sensor G62 readings.
Another thing I would do is to check if your in-tank electric pump is working. Remove the upper hose from tandem pump and activate Output Test for the pump using VCDS. Spills fuel?
Tested the in tank fuel pump. When activated with VCDS diesel comes out. There is not anything obviously wrong when flicking through VCDS apart from the new P0299 error and absolutely no acceleration when the car hits about 2200rpm. It seems that flooring it and hitting the kick down switch causes the issue instantly.

I went through and tested the vacuum on the turbo actuator and n75. All seems fine. The turbo actuator moves when I apply vacuum.

I have also reset all the factory defaults using VCDS. Could this somehow have caused this issue.

Can you think of any other tests to try? I cannot think what could be wrong. It is such a strange issue.
rudder_nz is offline   Reply With Quote
 
Page generated in 0.06297 seconds with 8 queries
[Output: 15.37 Kb. compressed to 13.90 Kb. by saving 1.47 Kb. (9.57%)]