View Single Post
Old April 15th, 2019, 15:27   #5
KERMA's Avatar
Join Date: Sep 2001
Location: here

VCDS Measuring Values Blocks 140 and 143.
Minimum coolant temp = 50C

Not in regen... If you see one of the fields in MVB 143 = 18.4 while the others are some smaller value, under some load, then that's a bad pressure sensor and or injector. All of them = 18.4, then it means the diffference is enough to put you in "mini limp mode" so to speak.

If you see MVB 140 with one of the 4 fields that remains significantly different from the others = bad injector

Peak cylinder pressures are not all that relevant
HP is for show, TQ is for go.
celebrating since 2002
kermatdi on facebook
No, no, you're not thinking; you're just being logical. - Niels Bohr
KERMA is offline   Reply With Quote
Page generated in 0.06172 seconds with 8 queries
[Output: 15.23 Kb. compressed to 13.64 Kb. by saving 1.59 Kb. (10.43%)]