View Single Post
Old May 20th, 2018, 14:56   #15
spatuality
Veteran Member
 
Join Date: Nov 2010
Location: Ontario, Canada
Fuel Economy: 5.8L/100KM
Default

Figured this out.

The pedal was still sticking to the floor after assembly. It spit out a bit of fluid, then just air.

I knew the brake fluid reservoir had to be at full for the clutch line to pull fluid, but that container needs to really be just shy of overflowing to get a couple clutch pedal pumps out of it.

Container filled right to the brim, no cap, bled the clutch and kept the resovoir filled. By the third bleed the pedal got firm, by 6 there were no bubbles, and I kept bleeding through 12 repetitions out of paranoia.

Last edited by spatuality; May 22nd, 2018 at 08:48.
spatuality is offline   Reply With Quote
 
Page generated in 0.06724 seconds with 8 queries
[Output: 14.86 Kb. compressed to 13.25 Kb. by saving 1.61 Kb. (10.85%)]