View Single Post
Old November 12th, 2019, 08:04   #10
jptbay
Veteran Member
 
jptbay's Avatar
 
Join Date: Aug 2007
Location: Thunder Bay
Default

Checked a bunch of things this morning and it looks like my three bar map is the issue.
Click on thumbnails for larger picture.
In measuring blocks in VCDS, both idling and engine off, boost is showing 2196 mbar. When engine off specified is supposed to be 192. Idling specified is just over 1000.
Also group 22 shows charge pressure system malfunction.
Funny how no fault codes were logged.
Ignore the MAF readings. It's not working because as I previously mentioned it's the wrong one, and clearly not working, so a new proper BEW one is on it's way.
Going to order up a new map and see what happens.

__________________
2003 Beetle, 18/56, 3 Bar MAP, 11mm pump, Bosio R520's, Cat fuel filter, PD lift pump, Kerma OMI, Kerma tune, IDParts lower boost pipe, Tyrolsport SMIC, Turbo S fender liner, PD150 intake w/racepipe, IDParts 2.5" stainless downpipe & 2.5" straight exhaust, ARP headstuds, ASV Pistons, I.E. I-Beam rods, BFI stage 1 mounts, Spec stage 3+ clutch/18lb flywheel, R axles, VR6 spindles, GLI big brakes F&R, 17" Enkei RPF1's, Koni FSD's, Evolution skid plate, McNally 30 PSI boost/EGT gauge, OEM HID's ...
jptbay is offline   Reply With Quote
 
Page generated in 0.08571 seconds with 8 queries
[Output: 15.78 Kb. compressed to 14.20 Kb. by saving 1.58 Kb. (9.98%)]