View Single Post
Old December 1st, 2019, 14:34   #38
Join Date: Jul 2013
Location: Hungary

Hello guys!!
So today i got a little time i checked the holes on the actuator and it seems it sits the lowest point so i cant make any adjustment on the actuator itself!
After that i unbolted the 3 bolt that holds the actuator in place and i checked if i push down the actuator a little bit if i change the actuator is it possible to set the rod lenght longer but unfortunately it cant go longer because something stops the arm inside the i made a log in 3rd gear from ~1800rpm to ~4000rpm to check if i got over boost and check the intake temperatures here is the log!

At the log i took WOT off somwhere in 4100rpm.
What do you guys think about this log?
One thing i noticed the n75 duty cycle doesnt max out when i go with stays somewhere ~80% as you can see in the logs....
maybe i have to try in 4th gear...
Also downloaded the MAP of the car maybe some1 who knows programming way better than me can help me check the file?
Ricsi168 is offline   Reply With Quote
Page generated in 0.06398 seconds with 8 queries
[Output: 14.80 Kb. compressed to 13.37 Kb. by saving 1.43 Kb. (9.66%)]