I just upgraded my injectors set the I/Q to 5 via hammer mod, got my tune upgraded from stg2 to stg4 And installed a new 3 bar MAP. Im now getting 16490 codes. It won't produce any boost with the 3 bar map and won't rev over 2500.
If I pug in my old (stock) 2.5 bar map (outside of the intercooler)I get no codes. If plug in the 3 bar map when not mounted in the intercooler I still get the code. I have not tried to install 2.5 map to if it will produce boost.
Is there a measuring block in VAG COM to look what the map voltage is?
I did the n75 test and the actuator arm on the turbo moves about 3/4" of an inch.
I'm assuming one of 2 things. I've got a bad (new) 3 bar MAP or the tuner forgot to set the tune for a 3 bar map.
If I pug in my old (stock) 2.5 bar map (outside of the intercooler)I get no codes. If plug in the 3 bar map when not mounted in the intercooler I still get the code. I have not tried to install 2.5 map to if it will produce boost.
Is there a measuring block in VAG COM to look what the map voltage is?
I did the n75 test and the actuator arm on the turbo moves about 3/4" of an inch.
I'm assuming one of 2 things. I've got a bad (new) 3 bar MAP or the tuner forgot to set the tune for a 3 bar map.