Hi,
I've recently fitted an Audi 2.5TDi 1996 AAT code 5 cyl engine to my Crewcab Syncro. It runs ok but the glow plug light it flashing away at me (I know its the ECU telling me something is wrong).
Dispite my best efforts to strip out the loom to just what I needed, I managed to loose the Diagnostic wire from the ECU. The car had OBD1, I think that the Black plug just needs a feed and earth, and that the White plug has a Green/Red wire from the Immobiliser unit but I don't know where the other wire (white, or white and ... ) goes to.
Does anyone have access to a wiring diagram for this year or could anyone tell me what pin number from the ECU the diagnostic wire is correct?
Thanks
MG
I've recently fitted an Audi 2.5TDi 1996 AAT code 5 cyl engine to my Crewcab Syncro. It runs ok but the glow plug light it flashing away at me (I know its the ECU telling me something is wrong).
Dispite my best efforts to strip out the loom to just what I needed, I managed to loose the Diagnostic wire from the ECU. The car had OBD1, I think that the Black plug just needs a feed and earth, and that the White plug has a Green/Red wire from the Immobiliser unit but I don't know where the other wire (white, or white and ... ) goes to.
Does anyone have access to a wiring diagram for this year or could anyone tell me what pin number from the ECU the diagnostic wire is correct?
Thanks
MG