ryanp
Vendor
- Joined
- Jun 22, 2008
- Location
- Barnsley, South Yorkshire, UK
- TDI
- Arosa CR - 550hp - 9.7 @ 150mph 1/4 Mile, Citigo 4x4 CR TDi - 340hp, Caddy 2.0 CR 4x4 TDI - 300+hp, Golf Mk2 Van 1.9 TDI - was 290hp, Mk5 Ibiza 2.0 FR TDi - 270hp, BMW 135d - 360hp, BMW 330d - 335hp, BMW 335d - 380hp + a few more ........
GTB Turbo Flange Adapter for Longitudinally Mounted TDI Engines
Fits ALL VW Passat / Audi A4 / A6 and Skoda Superb Vehicles with the 1.9 and 2.0 TDI Engines
This kit consists of:
Darkside Developments Waterjet Cut GTB Turbo Flange
4 x Allen Cap Head Bolts
2 x Countersunk Allen Head Bolts
This flange adapter bolts directly on to your existing Exhaust Manifold to allow the fitment of the Garrett GTB Series Turbochargers (GTB2265VK Hybrid, GTB2260VK, GTB2056VK and GTB1756VK) to your VW Passat, Audi A4, Audi A6 and Skoda Superb. These turbos are tried and tested on the VW Group TDI Engines and have been proven for reliability and power far above any Hybrid turbo.
Please see below for more photos of this flange fitted to a manifold and vehicle.
This flange will require your existing Exhaust Manifold to be post matched to get the best gas flow. This can be done very easily with a Dremmel or Die Grinder.
These are £48 inc Shipping Worldwide.
We can also supply GTB Turbochargers, Downpipe Flanges, Port Matched Manifolds, Oil Feed Lines, Vacuum Actuator Conversions and other parts required for this conversion. Please PM me for details
These are IN STOCK and Ready to Dispatch.
MADE IN THE UK
Please note - this adapter will NOT fit in transverse mounted engine bays, such as the VW Golf and Audi A3.
Fitted to a Passat/A4 1.9 8v AWX Manifold (Manifold available seperately)
Fitted to a Passat/A4 1.9 8v AWX Manifold with GTB2260Vk Turbocharger (Turbo, Downpipe Flange and Manifold available seperately)
Fitted to an Audi A4 1.9 8v AWX Exhaust Manifold with a GTB2260VK Turbocharger and Darkside Developments Oil Feed Line (Turbo, Downpipe Flange, Manifold and Oil Feed Line available seperately)
Last edited: