View Single Post
Old August 19th, 2019, 10:51   #423
HeatAttack
Newbie
 
Join Date: Aug 2019
Location: Tn, USA
TDI(s): 98 vw beetle
Default

Quote:
Originally Posted by brnsgrbr View Post
I am just going to add in my two cents on this one. I am currently running BF good rich K02ís. 27 inch on 16 inch wheels. Turning is restricted already. I donít see you being able to do 31 inch tires. Even with spacers. The issue isnít so much of how the tires turn out as much as the issue is the tire is rubbing on the firewall side because of the space.

I donít know the engine power train set up on your off-road vehicle. I will say, that getting out of first gear is a little harder even though itís just two more inches.

Below is what I need.
I am running airbags all the way around. What I would love, is to have the ability to have a CNC disc or two that are 2-3 3inches thick on top of my front airbags. I got a quote and the price was way too high basically $1000 to be able to do it not including labor. If anybody could get some reasonable pricing on CNC machining I would be very very grateful.


Sent from my iPhone using Tapatalk Pro

Thanks you so much for your input, that is exactly the type of info I need before I get moving on this project and the type of things I would not have known until everything was in place and mounted. Obviously a firewall is way more of an issue then removing some fenders or cutting out some plastic or rubber shielding some where. Ill reconsider my tire size to something more in line with what you have and go from there.



I am not looking to make this some sort of major Baja bug or an offroad beast, I have a truck for that. Just wanting to get it up high enough where I can do some slightly more difficult trails without to much difficulty and less chance of bottoming out/high centering, or cracking an oil pan.
HeatAttack is offline   Reply With Quote
 
Page generated in 0.06441 seconds with 8 queries
[Output: 16.05 Kb. compressed to 14.58 Kb. by saving 1.47 Kb. (9.16%)]