Hopefully it is the rear bearing. I had a clunk over bumps in my car and it was the trailing arm bushings. VW says they are not replaceable and that is close to true but I replaced mine. I have the insertion tool that worked very nicely. I also have the tool to press the rear bearing in.Also, I'm getting a lot of noise from the rear passenger wheel - pretty sure the bearing is going. How tough are they to replace? (intact the whole suspension is getting pretty weak and the front is making a slight clunking when at a full turn) yeah, it's time to move on...
I might be interested, throw me a price by PMhead including injectors,
, block but likely bent rod as it hydrolocked, 10mm injection pump, injector lines (the hard ones),.
2 door Golf interior? I've got an '03 with black dash and bluish grey seats, could use seats, etc. if your's aren't torn.I might be interested, throw me a price by PM
Tons of 2dr black interior parts you can have free if you want them, oh and a stock base model radio/speakers
The front seats are still in use, but the rear ones can be had for free2 door Golf interior? I've got an '03 with black dash and bluish grey seats, could use seats, etc. if your's aren't torn.
If you pull them out there's a huge amount more room back there.Thanks, I'm good for back seats (been folded down for years)...
I like Frank's work too. If he charges a little more than some local guy, it's an irrelevant amount amortized over the next 300k-400k miles.Franks TDI in MO.. just had him do one up for my 04 BEW. Great guy. And knows what he is doing... and ya get what ya pay for far as I'm concerned..
I've delivered parts there, and it seems like a competently-run shop.I'd rather go local if I can. Less hassle with shipping and such. Anybody use Headwerks in Bloomington? I had a chevy head done there about 10 yrs ago, but haven't heard a word since.
Very common problem.After some research I think I've got a good idea of my click. I'm thinking it's the upper strut bearing. So, I'm ordering upper strut bushings and bearings.
Easier to do on here, you really can't see anything from the top on the car.Hey 486, what would it take for me to stop over and check out ur set up and pick ur brain on some hybrid turbo stuff??
If his head is damaged I have one to sell.Who wants to take on a broken timing belt on a 1999.5? Not my car but a guy I used to work with. He is in Excelsior but I am betting he could drag it to you. Send me a PM or email and I will connect him with you.