copbait
Veteran Member
I have run into another problem. Now that the motor is back in and everything is working correctly except the brake lights stay on all the time. I ran measuring blocks and it shows the module think the brakes switch is on, so I unhooked the connector to the brake switch and it now shows off but the brake light stay on.
So do I replace the brake light switch, or is there a problem with the module?
I also noticed in the measuring blocks there is a block for brake light switch via CAN which shows not connected, this is not applicable on the MNS Passat is it?
So do I replace the brake light switch, or is there a problem with the module?
I also noticed in the measuring blocks there is a block for brake light switch via CAN which shows not connected, this is not applicable on the MNS Passat is it?