View Single Post
Old June 12th, 2019, 11:23   #413
Veteran Member
dhangejr's Avatar
Join Date: Mar 2017
Location: Tacoma
TDI(s): mk4 Jetta
Fuel Economy: 49 high 44 mix average

Originally Posted by vandermic07 View Post
I just redid the whole front end on my 01 a few months back. Front and rear poly bushings, ball joints, struts/springs with 2" lift, poly top strut mount. I had noticeable inner wear in the front within the first 2 weeks (~1000 miles). The car was also really squirrely in turns and rain.

The toe was out by 1" front to back of tire. (i forgot to check after i was done putting everything back together probably because i had just about everything go wrong on this job and i was fed up!! Rust!!). I just used the tape measure method and got her lined up. No more inner wear!! Ive done various levels front end jobs and never had to touch anything.
Iím having the same inner wear issues.
Did you shift your rear beam at all?
I think maybe m gonna have to pay to gave the subframe and rear beam shifted
dhangejr is offline   Reply With Quote
Page generated in 0.06850 seconds with 8 queries
[Output: 15.74 Kb. compressed to 14.21 Kb. by saving 1.53 Kb. (9.74%)]