Updating VCDS label file 038-906-016-BEW.lbl

One of my (new) projects is to add some of the missing measuring blocks to the label file for my 06 TDI (038-906-016-BEW.lbl). I've done this by adding the below list of measuring blocks (from a German label file for an engine that uses a very similar ECU) to the current VCDS label file.

Unfortunately my German is not very good and I could use some assistance with the translation (plus verification that the ones I have translated are correct ). Anyone with some spare time that's willing to help?

; added measuring blocks:
; 028, 030, 031, 032, 033, 040, 041, 042, 043, 046, 047, 051,
; 063, 064, 074, 086, 087, 089, 090, 091, 126, 128, 213

028 Could be "Accelerator Pedal Position"
051 "Engine speed Recognition"
063 "Engine Cooling (Climate Control, AC)"
064 "Engine coolong (engine itself)"
090 EOBD/OBD-2 EGR
126, 128 "CAN-Databus Communication (Powertrain)"

I guess you need to check those mentioned groups and verify they're showing something similar to what I've posted here. If you need descriptions of individual measuring blocks, please let me know. Hope this helps.

hid3, Thanks for the response. Details for the blocks you listed have already been added to my version of the label file. A copy of the latest version is available here for anyone's review or use.

I added two areas for the coding to add 6-speed manual and all wheel drive:
C00,Engine (J248) Coding
C01,0?x00xx: Heating/Air Conditioning
C02,0 = Automatic Climate Control (Climatronic)
C03,1 = Manual Climate Control (Climatic)
C04,0x?00xx: Service Interval
C05,0 = with flexible Service Interval
C06,3 = 1 Coolant Fan
C07,5 = without flexible Service Interval
C08,00x0?xx: Powertrain
C09,0 = Front-Wheel-Drive (FWD)
C10,1 = All-Wheel-Drive (AWD)
C11,0xx00?x: CAN-Databus
C12,+1 = Brake Electronics (ABS)
C13,+2 = Airbag
C14,+4 = Climatronic
C15,0xx00x?: Transmission
C16,1 = 5-Speed Manual Transmission
C17,2 = 6-Speed Manual Transmission
C18,4 = 5-Speed Automatic Transmission
C19,8 = 6-Speed Direct Shift Gearbox

Brian, do you have a link to Dan's original file? That you modified?

Dan

just the link in post #3, is there a newer one?

No, that is the same I have.
I just missed the link.