View Single Post
Old January 23rd, 2019, 17:51   #7
burn_your_money
Veteran Member
 
Join Date: Oct 2012
Location: North Bay, ON
Default

I just did this last week on mine. I needed a 32mm wrench. I had to cut it in half (around 8" long) and used the box end. There is 1 o-ring at the top and 1 square edge o-ring at the bottom. I bought the seals at the dealer for about $18.00. I didn't drain the coolant or the oil. I lost around 1/2 a liter of oil but caught it all with a standard oil drain catch pan.



gaskets
https://www.idparts.com/oil-cooler-g...vi-p-6504.html


exploded view
http://www.oemepc.com/vw/part_single...rt_id/0/lang/e


Part 14 on mine had a shaft (like a hollow bolt) running up that held everything together.
burn_your_money is offline   Reply With Quote
 
Page generated in 0.06848 seconds with 8 queries
[Output: 14.75 Kb. compressed to 13.32 Kb. by saving 1.43 Kb. (9.70%)]