Wheel Speed Sensor Wiring harness

folgart

Well-known member
Joined
Aug 27, 2003
Location
Charlottetown, PEI, CA
TDI
2005 Jetta Wagon
Hi all, VCDS reports:
Component: ESP FRONT MK60 0102
Coding: 0019458
Shop #: WSC 01266 785 00200
VCID: 346C03FB2EBD

1 Fault Found:
00283 - ABS Wheel Speed Sensor; Front Left (G47)
012 - Electrical Fault in Circuit - Intermittent

I have already replaced the sensor, time to check the harness.
Anyone have a wiring diagram?
 

mp3mike05

Veteran Member
Joined
Jan 24, 2010
Location
Greenville, SC
TDI
2000 Jetta GLS TDi
Hi all, VCDS reports:
Component: ESP FRONT MK60 0102
Coding: 0019458
Shop #: WSC 01266 785 00200
VCID: 346C03FB2EBD

1 Fault Found:
00283 - ABS Wheel Speed Sensor; Front Left (G47)
012 - Electrical Fault in Circuit - Intermittent

I have already replaced the sensor, time to check the harness.
Anyone have a wiring diagram?
Don't have a diagram but I will say did you take a good look at the wires where they go into the connector? Pull back the rubber and look in there. One of mine was pulled out when I bought my car (I think PO had dropped the spindle forgetting to unplug the sensor and it pulled it out)
 

folgart

Well-known member
Joined
Aug 27, 2003
Location
Charlottetown, PEI, CA
TDI
2005 Jetta Wagon
now revs weird

So I still have this issue, but it is getting a little more strange. Periodically thwe codes will self clear, and every time I brake the ABS fires. A couple of applications of the brakes and the codes come back on, and the car brakes normally. Today it happened, and with the clutch in the car revved on its own. No accelerator peddle, clutch in, cluth out, the car revved. ***?
 

simtdi

New member
Joined
Dec 22, 2007
Location
Trois-Rivières
TDI
Jetta TDI 2002
I have the same problem, I put a new sensor and my ABS is coding
00283 - ABS Wheel Speed Sensor Front Left (G47): Electrical Fault in Circuit
 

SheeB

Veteran Member
Joined
Jul 8, 2007
Location
Ottawa, ON
TDI
2001 Jetta GLS Manual
I have the same issue as the OP but I cannot get the bloody connector disconnected at the sensor. I tried working it up and down etc with no luck.
 
Top