View Single Post
Old August 25th, 2010, 18:14   #7
darkhorse
Veteran Member
 
darkhorse's Avatar
 
Join Date: Nov 2009
Location: Wisconsin
Fuel Economy: mid 40's
Default

Quote:
Originally Posted by ishmael010 View Post
installed it last evening. One question I have for those who already have theirs installed successfully, what torque is required on the bolts through the Banjo fittings, I tightened them down pretty snug, but seem to have a little leak, and it's not coming from the hose clamps.
Thanks!

Ish
Mine didn't leak & I didn't use a torque wrench. If it's leaking a wee bit I'd say just snug it down another 1/4 turn or so.
__________________
'06 Golf GLS 5 speed, Evo skid plate, Koni FSD's with Shine RSS, SBC stage 3, SMF, KERMA custom tune, R 32 snorkel,PD 150 airbox,MAF,TIP & manifold, K3B,R 783's, Colt stage 2, EJ SMIC, piping by ID Parts, Whitbread 2.5" DP, Aero muffler, 3"KERMA SS pipes, Sigma 5 short shifter, .681 5th gear & Peloquin, Nicktane 1 um fuel filter & DG/Amsoil bypass filter.
darkhorse is offline   Reply With Quote
 
Page generated in 0.06368 seconds with 8 queries
[Output: 15.67 Kb. compressed to 14.06 Kb. by saving 1.61 Kb. (10.29%)]